You are here:
without consideration of inclines and couplings
Restriction and NOTES: The roughness coefficients of the different pipe materials are not taken into account in the calculation, so the determination of the speed and the pressure loss is only an approximation. ²) Entry only with flat hose. The program then takes into account the increasing inner diameter as the pressure increases.:
The flow rate should be between 1.5 and 2.0 m/s.
Water requirement and sprinkling intensity
Pump size
PVC pipe
DN 100, 110 x 5.3: 99.40 mm DN 125, 140 x 6.7: 126.60 mm DN 150, 160 x 7.7: 144.60 mm DN 200, 225 x 10.8: 203.40 mm DN 250, 280 x 13.4: 253.20 mm
PE pipe
90 x 8.2: 73.60 mm 110 x 9.0: 92.00 mm 110 x 10.0: 90.00 mm 110 x 12.3: 85.40 mm 120 x 11.5: 97.00 mm 125 x 11.4: 102.20 mm
Quick-coupling pipe
89 x 0.8: 87.40 mm 108 x 0.9: 106.20 mm 133 x 1.0: 131.00 mm 159 x 1.1: 156.80 mm
Flat hose
75: 75 mm 90: 90 mm 102: 102 mm 110: 110 mm 127: 127 mm